News

 

 

The Cama C6 Wheelchair stair lifts from RAISE Lift Group are a good solution for transporting 1 person in a wheelchair or 1 person in the sitting position to go up the stairs of premises.

 

 

The C6 Wheelchair stair lift is designed to go on stairs that change direction, i.e. Stairs that go around the corner or have a landing in the middle.

The C6 lifts are great for existing and new buildings as minimum building works are required to have the lift installed. The lifts fold up so they take up minimum area of a building. Once used they can fold up against the wall and only sit 395mm off the wall. They can be installed on stairs that are inside or outside the building.

We usually require a solid wall at one side of the stairs which can be concrete, core filled block work, double brick, steel or timber. If the wall is in steel or timber the wall must be able to take to loads of the lift.

If there is no support wall at either side of the stairs, the lift can be supported off steel posts at an additional cost. The steel posts need to be fixed into concrete stairs in most cases, but other materials may be used providing they can handle the lift loads.

Power is required to the lift and is only 240V single phase. The power can go at the top or bottom of the stairs. The lift is powered by batteries so if mains power fails the lift can still operate.

Wireless lift controls are provided at the top and bottom of the stairs meaning no unsightly trunking on the wall or expensive hidden conduit runs.

 

Overall building works can be minimal for the Cama C6 to be installed which can reduce the total lift cost considerably.